Home Stretch™ Liquid Waterproofing is a solvent-based, elastomeric coating which cures to form a durable waterproofing membrane capable of bridging cracks up to 1/16th of an inch. Home Stretch™ Liquid is designed for waterproofing below-grade concrete, precast concrete, CMU and other vertical foundation surfaces where hydrostatic pressure may be present. When used with Poly Wall’s Polyflow® 10 and Blue Barrier Joint Filler 2200 compatible sealant , Home Stretch™ Liquid Waterproofing provides a complete foundation wall waterproofing system. It is not designed for above-grade applications, horizontal substrate applications such as decks, patios and roofs nor for use as waterproofing over ICF (Insulated Concrete Forming) systems. (Please see our Home Stretch Membrane sheet waterproofing system for that ICF foundation wall waterproofing).

Uses

Home Stretch™ Liquid Waterproofing is designed for waterproofing concrete and CMU walls. When used with Polyflow® 10 and accessories it provides a complete waterproofing system.

Please Note:

This product is not available in the following areas:
Maryland, Delaware, Rhode Island, Connecticut and California.

Home Stretch™ Liquid Waterproofing System
w/ Accessories

Features & Benefits

  • Easy to install; spray or roll
  • No primer required, install directly over clean and dry poured concrete, CMU or precast vertical walls
  • Cured coating provides a tough protective waterproofing barrier
  • Can be installed in both cold (0°F and rising) and hot (up to 120°F) temperatures
  • Covers hard to get to corners, transitions and footers more easily than sheet membrane products

System Components



Poly Wall
® Blue Barrier™ Joint Filler 2200 can be used as a detail sealant to fill voids and seams. In this case, it is used as a 3/4" filler at the wall and footer intersection and inside corners on the raw concrete.

 

 

Polyflow 10

Poly Wall® Polyflow® 10 is a sheet molded drain that establishes predetermined pathways for below-grade water management. A factory-applied fabric allows water to pass into the drain core while restricting the movement of soil particles which might clog the core. The core allows the water to flow to designated drainage. Polyflow® 10 is designed for vertical applications and are great protection layers for Poly Wall® Home Stretch™ sheet and liquid waterproofing products.

 

 

Poly Wall® Totalflow is prefabricated, high-capacity sheet molded perimeter drainage system constructed using a formed polystyrene core, designed specifically to transition water collected from sheet drains to an outlet drain. The Totalflow™ system along with end & tee accessories complete your vertical drainage & waterproofing protection system.

 

 


Poly Wall
® TotalflowTee Channel is designed for transitioning & re-directing collected water from Arroyo Outlet Channel to a hard pipe system for evacuation to daylight. Fits a  standard 4” drain pipe. The Tee Outlet is part of the Totalflow, which is prefabricated, high-capacity sheet molded perimeter drainage system constructed using a formed polystyrene core, designed specifically to transition water collected from sheet drains to an outlet drain.

 

 


Po
ly Wall® Totalflow™ End Outlet is designed for transitioning and re-directing collected water from Totalflow Outlet Channel to a hard pipe system for evacuation to daylight. It fits a standard 4” drain pipe.

Basement Waterproofing - Fluid Applied Membrane
Watch this video on YouTube.